D-GB6Q FUEL DISPENSER

D-GB6Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type :LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose :4.5m

Weight : 385kg

Dimension(L×W×H) : 1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 28 20ft: 13

oil, so as to reduce the volume of drained oil. Turn adjusting bolt clockwise to reduce discharge, anticlockwise to increase discharge. Therefore, changing the position of bolt enable discharge approach academic volume and reach the requirements on measurement transducer of national appraisal regulations. As two regulative bolts access to adjusting piston, the adjusting discharge in a circulation per bolt can be calculated in the following formula: △V = 1/2πd12 nt (2--4 ) △V ── adjusting value in per circulation; D1 ── diameter of regulative piston; n ── turning number of adjusting bolt; fuel dispenser t ── screw- pitch of adjusting bolt. There is another metal piston measurement transducer in current market. See the Diagram 2-19. Regulative piston is singularly installed in piston rather than connect with rod in this model. Its adjusting value in terms of per adjusting bolt is: △V = 1/4πd2 nt (2--5 ) Common failure and Troubleshooting Metal piston measurement transducer has the two common failures --- accuracy decline and mechanical trouble. Measure accuracy beyond scope The allowed measurement accuracy of fuel dispenser is ±0.3 %, repeated tolerance no more than 0.15 % according to the stipulation of JJG443-98 Fuel disp fuel dispenser enser. The maximum allowed tolerance of min. measured valv fuel dispenser e don’t exceed ±0.5 %，its repeated tolerance no more than 0.25 %. The ratio of maximum flow (Q max.) to minimum flow (Q min.) is 10 to 1. as fuel dispenser leave factory. The ratio should not be less than 5: 1 in inspecting at operation locale. All of exceeded tolerance is regarded as beyond measurement accuracy. There are many elements and reasons resulting in measurement accuracy beyond scope, including unstable hydraulic system (extensive pressure fluctuation), electric system failure, thick colloid in frictional interface, measurement transducer abrasion, etc. The last two reasons will mainly be introduced in this article. Regulating adjusting

EPS Service Provider　　 MOC s　　 WEAT　　 EPS-POS　　 B+S　　 Interface　　 fuel dispenser Multi-HOST-Communication　　 Third Party　　 Management　　 EP　　 System -F c e　　 Sa　　 PO terf　　 In　　 fuel dispenser fuel dispenser OPT stand alone　　 LO　　 N　　 OPT Outdoor Payment Terminal　　 Connectable via IFSF to　　 Third Party Systems　　Scheidt Bachmann GmbH　　 Seite:2　　M nchengladbach Germany　　www.scheidt-bachmann.de　　

end for months grew more heated, not less. On February 24th Mr Thaksin responded by calling a snap election, barely a year after the last one and even though he has an unassailable majority in parliament. This may not be popular, but he has every constitutional right to seek a fresh mandate, and if voters do not like it then a simple and effective remedy will be available to them on polling day. What is more troubling for Thai democracy is the response of the main opposition parties and of the demonstrators in the streets. The former have announced that they will boycott the fuel dispenser election, and the latter have said that they are not interested in elections at all. Unless Mr Thaksin resigns by March 5th, declares a group of unelected megaphone-wielders, they will organise mass protests to drive out this enemy of democracy. Democracy is a young and delicate flower in much of East Asia, and despite the odds it has done pretty well. In the past couple of years, the ballot box has produced a smooth transfer of power in Indonesia, a defeat for the most populist candidate in the Philippines and a parliamentary victory for the opposition in Taiwan—all of them countries which, like Thailand, h fuel dispenser ave had a long history of authoritarian rule. The Philippi fuel dispenser nes has just imposed a state of emergency after yet another of its periodic alleged coup plots, but even there the urge to resort to direct action to overthrow an elected government seems at last to be on the wane. Although the democratic idea is gradually striking deeper roots in East Asia, these could still be plucked up if people and parties refuse to accept the verdict of the ballot box. The danger in Thailand is that Mr Thaksin s foes will try to achieve through “people power�what they do not have the numbers to achieve at the polls, or that the Proudly Produced by nEo  army will revert to its pre