F-GB6Q FUEL DISPENSER

F-GB6Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :350kg

Dimension(L×W×H): 1860*660*2190(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 17

erance not exceed ±0.3%，repeated measuring no more than 0.15% as fuel dispenser is operated within the flow range between maximum flow-rate (Qmax) and minimum flow-rate (Qmin). Flux scope is also called measurable range --- between minimum measured value and maximum flow-rate within basic tolerance. The ratio of maximum flow rate to minimum flow rate is called measurable ratio. In model testing the value is 10 to 1. Accuracy testing is conducted at six flow points within the measurable range so as to get their tolerances. This relation between tolerance and flux is called the tolerance nature of flow meter. The less flow tolerance the better. Measurable range ratio is 10 to 1 as fuel dispenser being left factory, testing three flux points, that is, Qmax, 0.4 Qmax, 0.1 Qmax . However, the ratio in operation place is 5 to 1, only testing two flow points -- Qmax , 0.2 Qmax . Minimum measured volume testing Testing purpose is to assess indicative tolerance when refueling by minimu fuel dispenser m measured value. Relevant regulations stipulate that the minimum flow rate don’t surplus 5L as for a fuel dispenser with maximum flow rate no more than 60L. Its maximum tolerance in terms of minimum measured value don’t exceed ±0.5%, measurable repeatability no more than ±0.25%. Flow stoppage testing The testing is conducted in order to define the possible tolerance range that generated in refueling progress in which hydraulic flow stop suddenly due to some accidents like power cut. Vapor separator performance testing It is conducted to value the capacity of vapor separator how much vapor would be divided from oil. Vapor separator’s function is to ensure that media passing over flow meter should be in single direction without any foam or bubble. Otherwise, flow meter can’t get rig fuel dispenser ht value fuel dispenser of measurement. Volume fluctuation testing The test is aimed at defining the hose’s inner cubage variability of fuel dispenser under maximum pressure condition. According to fuel dispenser’s working principal, hose always

€€ã€€ working groups Realization of Force Realization　　 other things to personal computers used for　　 of Torque Periodic Forces and Ion Accumulation.　　 legal control purposes secure data communi-　　 cation and downloading of software subject In the area of force measurement the testing　　 to legal control. The new software require- of the new 2 MN force standard machine　　 ments will likely be published in 2004 in the (2 MN FSM) was completed and the stated　　 form of a WELMEC Guide and then also be relative measurement uncertainty of å¢?2 è·?10 5　　 applicable to non-automatic and automatic was verified by internal comparison measure-　　 weighing instruments. ments. The 2 MN FSM can thus in future　　 again be used for calibrations and interna-　　 The ne fuel dispenser w Dynamic Weighing Working Group　　 tional comparison measurements.　　 intensively worked within the European　　 GROWTH project MID Automatic Weighing The new force measuring machine for small　　 Instruments. This project aims also with forces (10 mN to 10 N) was equipped with a　　 regard to the MID to further harmonize the rotary table to allow loading of the force　　 test procedures for automatic weighing transducer with forces in different fitting　　 instruments and to largely reduce unneces- positions. Rotational effects i. e. potential　　 sary test efforts. interactions between transducer and measur-　　 fuel dispenser fuel dispenser ing device can now be investigated also for　　 As regards international regulations the　　 small forces. The control of the measuring　ã€

eements. What not to expect Google s share price continued its fall (to below $345) as investors took fright at an article forecasting the internet firm s share price could fall by half over the next year if revenue, under pressure from competition in online advertising, falls short of expectations. The darling of Wall Street last year, Google has seen its share price fall by 28% since peaking on January 11th this year, after quarterly results that failed to match analysts estimates. See article P&O s shareholders voted to accept a £3.9 billion ($6.8 billion) offer from DP World, ending a bidding war in which the Dubai-based company s effort to buy the British ports operator was almost thwarted by Singapore s PSA. P&O s share price has risen by close to 70% since confirming it had been approached about a takeover last October. Warren Buffett is stepping down from Coca-Cola s board of directors to spend more time at his investment firm. The billionaire inves fuel dispenser tor, who holds 8.4% of the beverage-maker s shares, joined the board in 1989 and was influential in the sometimes controversial decisions at Coca-Cola over the past few years. Arcelor, a steelmaker based in Luxembourg that is fighting a hostile takeover bid from Mittal Steel, raised its shareholder dividend by 85% after reporting a 66% increase in net profit for 2005. Earlier, Lakshmi Mittal, who heads the world s largest steelmaker, said his offer had received an “overwhelmingly positive�response from investors in Arcelor. His comments came as Mittal Steel posted a 28% fall in profit for 2005. Authorities in the European Union and United States raided the offices of several large airlines as part of a probe into possible price fixing in air cargo (some Asian carriers are als fuel dispenser o being fuel dispenser investigated). The companies involved said they were co-operating with the inquiry. Not a bad day at BlackRock Merrill Lynch agreed to merge its investment-management business with BlackRock, an upstart by comparison with the es