K-G22 FUEL DISPENSER

K-G22 FUEL DISPENSER

Pump : Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :ype LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

keep good earthing and sealability and conduct pressure –resistance test as regulation in national standard GB50156-2002. Don’t input oil or burry tank before pressure testing. Diagram 5-4: Correct installation of fuel dispenser and tank The inlet pipe of tank should be mounted bottom valve, which is vertical and 100mm higher than tank bottom. As crucial to fuel dispenser’s normal operation, bottom valve should have good sealability and performance. It is prohibited to connect fuel dispenser with semi-underground tank, above ground tank and high position tank. If oil level is higher than vapor separator exhaust pipe would overflow leading to insecurity working circumstance. Given have to adapt one of above tank, the exhaust pipe of vapor separator should be sealed in case oil overflow out. Match of fuel dispensers and tank: if adopt one tank delivering oil to two or more fuel disp fuel dispenser ensers each fuel dispenser should have single pipe without i fuel dispenser nterconnection. Diagram 7-4 shows the right connection. Diagram 5-5 is wrong one. Diagram 5-5: Inappropriate installation of fuel dispenser and tank If one fuel dispenser is connected to two or more tanks valve is necessary to be installed in pipeline. Diagram 5-6 illustrates this kind of connection. In short, the connection of fuel dispensers and tanks, whatever working circumstance, should comply with the basic principle that one tank, one valve and one pipe are connected with one fuel dispenser. Otherwise, the normal measuring function of fuel dispenser would be affected. Diagram 5-6: Combination of two or more tanks Electric Installation The gene fuel dispenser ral power switch is installed indoors, switch fuse is defined as the current of motor when starting. The earthing line of fuel dispenser should firstly connect with ground device of filling station before electric installation. Power wire of fuel dispenser should connect into TN-S power supply system, compatible to TN-C-S and TN-C systems. Lead and wire should be five-bind copper thread with two protective

.................................. 58　　 12.1.2. Transaction.............................................................................................................. 58　　 12.1.2.1. Distribution ceiling.............................................................................................................................59　　 12.2. EMV APPLICATION ........................................................................................................ 59　　 12.2.1. Parameterisation ...................................................................................................... 59　　 12.2.2. Transaction.............................................................................................................. 59　　 12.3. MAG CARD APPLICATION..................................................................................... fuel dispenser ............. 61　　 12.3.1. Parameterisation ......... fuel dispenser ............................................................................................. 61　　 12.3.2. Transaction.............................................................................................................. 61　　 12.3.2.1. Distribution ceiling(s)........................................................................................................................61　　 12.3.2.2. Code check(s)....................................................................................................................................62　　 12.3.2.3. Management of payment method (cash credit deferred fuel dispenser cash).............................................62　　 12.4. FEATURES COMMON TO ALL APPLICATION SOFTWARE .............................................................. 62　　 12.4.1. Parameterisation ...................................................................................................... 62　　 12.4.2. Transaction.........................................

ses really are angry enough with Mr Thaksin to give up a day s pay to join a demo.  © 2006 .  About sponsorship Australia Ten years, and still planning to go on Mar 9th 2006 | SYDNEY From The Economist print edition John Howard contemplates “the ever-receding finishing line� Get article background WHEN he was sworn in as Australia s prime minister on March 11th 1996, John Howard probably had no idea that he would still be in office ten years on. Indeed, he came close to losing his next election, two years later. Since then, however, his electoral popularity has climbed to the point where he has never seemed more in control nor, at the age of 66, more determined to plough on. As his government celebrates his triumph, Mr Howard brushes aside questions about retirement by insisting that he will stay as long as his con fuel dispenser servative Liberal Party wants him. This means that he is li fuel dispenser kely to contest a fifth election, due in late 2007. And another win would put him in sight of equalling the achievement of Sir Robert Menzies, Australia s longest-serving prime minister (a total of 18 years), the Liberal Party s founder and Mr Howard s hero. How has this come about? Mr Howard is hardly the most charismatic of leaders. Nor is he a man with particularly fresh ideas. The main ideas he stands for—open markets and a deregulated economy—were put in place by the Labor government that ruled for 13 years before him. Those years were disastrous for Mr Howard and his party. “The party was broke,�recalls Ron Walker, a former Liberal treasurer, and fuel dispenser the man in charge of the forthcoming (formerly British) Commonwealth Games in Melbourne. “We were an absolute mess. Frankly we hated each other and we never thought we d win an election again.� Mr Howard proceeded to win four elections in a row. Luck played a big part, in the form of an economy that was starting to grow as the result of earlier reforms, and has never stopped growing since.