U301 Automatic Nozzle

U301 Automatic Nozzle

U301 series automatic nozzles are designed with today's customer in mind. Small, trim, light weight, easy and convenient to operate, the is a rugged performer that offers long life and reliable service.

Materials:

Body: Aluminum

seals: Buna-N

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U301-B/D/F Flow rate: 0-60 L/m (15/16")

U301-A/C/E Flow rate: 0-45 L/m (13/16")

Working Pressure: 0.18Mpa

U301 Automatic Nozzles-for diesel, kerosene and all kinds of gasonline service.

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Low profile aluminum body- light weight, easier to handle, provides an attractive, image enhancing appearance.

Hold-open rack is available for full service applications.

The one hand control means easy setting to flow rate for customer's convenience.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.

Selective splash guard.

100% Factory Tested.

Available Colors- color chart on inside back cover

Replacement Parts:

Key Description

1 Spout 13/16''

2 Spout 15/16''

3 Full hand insulator

4 Lever

5 Lever assembly

6 Diaphragm assembly

7 Main valve assembly

Package:

Net Weight Cross Weight Dimension

18.75kg/case of 15

12.25kg/case of 10 22kg/case of 15

15kg/case of 10 55x34x42.5cm/case of 15

37.5x34x43cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

on, used to on duty or off duty or refueling for person who hasn’t card. Management card Hold by station owner, management card is used for station management. Pump-verifying card Hold by station master or manager, it is used to verify pump in troubleshooting. Maintenance card Hold by station or superior firm, it is used as maintenance of fuel dispenser. Parameter card The card is used as presetting para fuel dispenser meters such as density, volume of pre-close valve. PSAM card PSAM card is employed to verify the validities of above cards, which is installed in reader of fuel dispenser. Fuel dispenser doesn’t work without RSAM card. There are many card seats for using on fuel dispenser. Card-controlled fuel dispenser Card –controlled fuel dispenser actually is the one mounted an IC card read fuel dispenser er. At present, most of card-fuel dispenser integrated keyboard and card reader, realizing the combination of balance with IC card. 5.1 Structure of IC card reader for fuel dispenser Diagram 3-26: Basic structure of IC card reader In above diagram, CPU, adopted 32K byte memory, is core component in reader, which controlled all functions of reader. Port I is used for communicating fuel dispenser and realizing control manipulation such as readout filing data from fuel disp fuel dispenser enser, download unit price and transmit operating information to fuel dispenser through keyboard. Port II is responsible for exchanging filled data with station’s supervision computer and transmitting filing record to background; readout important information from supervision computer such as black and white list, unit price and enquire blacklist and greylist. Memory is used to store filling record, blacklist and whitelist. Clock circuit provides the time in which filing record is generated. Matrix liquid crystal screen displays data prompting user and balance of card. PSAM card group contains PSAM card that is used for safety attestation and data encryption. User socket is used to insert IC card; card lock is insta

g　　NOTE Objective evidence may be obtained through observation measurement test (3.8.3) or other means.　　3.8.2　　inspection　　conformity evaluation by observation and judgement accompanied as appropriate by measurement testing or　　gauging　　 ISOIEC Guide 2　　3.8.3　　test　　determination of one or more characteristics (3.5.1) according to a procedure (3.4.5)　　3.8.4　　verification　　confirmation through the fuel dispenser provision of objective evidence (3.8.1) that specified requirements (3.1.2) have　　been fulfilled　　 15　　? ISO 2005 All rights reserved　　ISO 9000:2005(E)　　NOTE 1 The term verified is used to designate the corresponding status.　　NOTE 2 Confirmation fuel dispenser can comprise activities such as　　 performing alternative calculations　　 comparing a new design specification (3.7.3) with a similar proven design specification　　 undertaking tests (3.8.3) and demonstrations and　　 reviewing documents prior to issue.　　3.8.5　　validation　　confirmation through the provision of objective evidence (3.8.1) that the requirements (3.1.2) for a specific　　intended use or application have been fulfilled　　NOTE 1 The term val fuel dispenser idated is used to designate the corresponding status.　　NOTE 2 The use conditions for validation can be real or simulated.　　3.8.6　　qualification process　　process (3.4.1) to demonstrate the ability to fulfil specified requirements (3.1.2)　　NOTE 1 The term qualified is used to designate the corresponding status.　　NOTE 2 Qualification can concern persons products (3.4.2) processes or systems (3.2.1).　　EXAMPLE Auditor qualification process material qualification process.　　3.8.7　　review　　activity undertaken to determine the suitability adequacy and effectiveness (3.2.14) of the subject matter to　　achieve established objectives　ã€

s strategy of separating Mr Blair from his party and hugging him so tight that he expires in Tory arms. For the Liberal Democrats and their new leader, it is a chance to carve out an identity as the most forthright foe of what they hope is an unpopular reform. As for the bill itself, its meaning is probably now best left to literary critics. When a white paper first aired Mr Blair s ideas fuel dispenser for reforming secondary schools, it came with a rousing introduction. Repeating a manifesto commitment, Mr Blair said he wanted all schools to be independent and proposed a new trust structure for schools. He argued that Local Education Authorities (LEAs), the bureaucracies that run many schools, should not be both commissioners and providers of education. Let fuel dispenser a thousand choices bloom. For a large section of the Labour Party this sounded horribly like a move towards a market in education and a way for wicked schools to select their pupils. Both go against Labour notions of equality. In December 2005, 91 Labour Members of Parliament signed up to an alternative white paper, which aimed to improve standards in schools while keeping the bureaucrats in control. (Interestingly, research by Philip Cowley fuel dispenser of the University of Nottingham and Paul Cairney at Aberdeen University shows that the signatories are twice as likely to have been to selective grammar schools than the average Labour MP.) Many now hint that they can support the reform in its altered form, while the government insists it has not watered down its proposals. What has changed? First, there is now no mention of the new trust schools in the bill (they are instead inelegantly styled “foundation schools with a foundation�. The education department claims this is a legal nicety, but it is one that allows Labour opponents of the bill to argue that they have got their way. Second, Ruth Kelly, the education secretary